Feature | SC123-LF from Beck | |
Speed | 96 MHz | 190 MHz |
RAM | 8 MB | 32 MB ( 64 MB option ) |
Flash | 2 MB (8 MB on SC143) | 256 MB |
Serial ports | 4 TTL (Rx, Tx, RTS, CTS signals on each) | 4 TTL ( Full modem signals on port-1, Rx, Tx, RTS & CTS on other 3 ports) + Console port with RxD & TxD |
Other interfaces | I2C SPI CAN 2.0 USB | I2C |
Ethernet interfaces | 1 - 10/100BaseT Phy signals 1 – MII interface signals | 1- 10/100 Base T Ethernet connector |
GPIOs | 34 GPIOs | Upto 19 GPIO's and co-exist with TTL Lines |
Analog inputs | NA | 2 AIs |
Type | BGA single chip | Board with 30 pin connector & Ethernet connector interface. |
Form Factor | 25 * 25 * 5 mms | 55 * 63 * 18 mms |
Power Consumption | 2W maximum | 2W maximum |
Voltage needed | 3.3 V | 3.3 V |
Protocol support | IEC 61850, IEC 104, DNP3.0, Modbus, IEC 101,103, Profibus etc., | IEC 61850 and Supports another 24 protocols including IEC101,103,104, DNP 3.0 and Modbus |
GOOSE Performance | Meets IEC 61850-5 requirements | Configurable for all GOOSE Performance Levels |
Conversion Support | Available | Available |
Logic Support | IEC 61131 programmable engine | Supports major functions only |
Integration & Time to market | BGA solutions Needs more time. Board solution can be implemented in hours. | Easy integration through simple board within 2 weeks |
Configuration & Diagnostics | Available | Available |
NERC/CIP Compliance | Not Known | Compliant |
IEC 61400-25 Compliance | Compliant | Compliant |
Certifications | Planned | Products using Kalkitech OEM Board & Firmware has been Certified at KEMA, CPRI test labs by various customers |
Development Kit | Avavailable (Pre-developed and only configuration required) | Available (Pre-developed and only configuration required) |
SCL / IED Tool | ICD Designer; Configuration of client/server by SCL file | Available with Kalkitech ICD Manager and SCL Manager |
TCO | $ | $ |
Note: The specification of Beck IPC is based on publicly available content and inputs from Karlheinz Schwarz of Netted Automation.
